My goal was to do a soured beer, started in a glass primary for 1 month, then moved into a brand spanking new plastic bucket (food grade of course), and laid down on some French oak for a good long while (at least 6 months until bottling...and even then I'm not sure if I will). The gravity however would be higher than a standard Rodenback, or Dutchess De Bourgogne and would be loosely based on an existing homebrew recipe that I went over at the brew shop.
You know what had never happened to me while brewing previously? A stuck sparge that's what! Yes I was living the dream..brewing and never having any sort of sparge issues...well that definitely came to a screeching halt this morning...
So after trying every little maneuver I could muster with my mash paddle, then moving on to blowing into the vinyl tubing, I was about to put one to the mash tuns side and then finish it off in true Mortal Kombat style by screaming "GET OVER HERE" and then proceeding to chuck a
butter knife attached to my fly fishing line at it I decided I should first attempt to move all of the contents out, and into a bucket.
Well after moving all contents I found that my vinyl tubing had come loose so nothing was moving from under the false bottom, I quickly reattached and proceed to move the grain and water back into the mash tun..
Did you see what I did there? I still feel like slapping myself.....
So..yes the tubing was disconnected BUT that should not halt all flow, what would halt all flow was if there a blockage somewhere. I realized that somewhat quickly after letting fly a string of vulgarity that likely had our neighbors thinking I have terets...and at that point all grain was back in the mash tun.
So..back we go-all grain back into the bucket, false bottom and all parts removed and rinsed (oh, and guess what? There was a blockage!), mash tun rinsed to ensure no grain was trapped under the false bottom when reassembled, grain goes back into mash tun, I go rinse the bucket as that is where I am collecting the wort and then I'm back in business!
With the slowest f'ing sparge I have ever seen..seriously it took an hour and then some..but eventually I was left with 5.75 gallons of wort..and a promise to myself that I would never brew again without using some rice hulls.
Fermentables:
Grain:
-17lbs Belgian Pale Ale
-1lb Flaked Wheat (or "that grain that fucks up your sparge if you dont use rice hulls")
-1lb Belgian Biscuit
-1lb US 6 Row
-1/8lb Belgian Aromatic
-1/8lb Belgian Special B
Other:
-1lb Belgian Dark Sugar (hard, not liquid)
-1/2oz Bitter Orange Peel
-1/2oz Sweet Orange Peel
-1/3oz Juniper Berries (crushed just prior to addition)
Hops:
Bittering:
-2oz Czech Saaz 2.5%AA-90 minutes
-1/8oz Amarillo 8.2%AA-90 minutes (not traditional but only used for AA content)
Flavoring:
-No hops added-orange peels, juniper berries, and Dark Candy added-15 minutes
Aroma:
-None
Yeast:
-Wyeast 3763, Roesalare Blend
Stats:
90 minute mash. Water to Grain Ratio 1.2 : 1
-155F at mash in
-149F at mash out
-Sparged with 20qts @ 168F
-90 minute boil
-Final Volume 4.75 gallons
Original Gravity: 1.080
3 comments:
Ok...so when you come back from hiatus you really come back! Happy to see all the activity here.
Sorry to hear about the blockage. Although featuring all the details (including mistakes) here has to help all us aspiring all grain folks.
Thanks and good luck!
haha, coming back strong was my intent. I just really wanted to do both of these batches for some time now and finally had everything lined up to do so.
I'll be resting up (well drinking up anyway) next weekend in Portland, OR but plan on coming back the following weekend with a Saison..which I've been highly anticipating for some time now.
At that point I should have a great tasting of my pumpkin ale, which by the way ended up tasting awesome at bottling (did that while the Belgian chilled..).
Cheers!
Whoa! I like the new design :-) Change is good.
Post a Comment